China factory CZPT Cost Saving 11kw 15HP 8bar Screw Air Compressor with Inverter with Hot selling

Solution Description

Rodlars Cost Conserving 11kw 15hp 8bar Screw Air Compressor with inverter

Merchandise Description

                   Non-regular customization service assistance

Please make more inquiry for the non-regular specification type and devices which
  are utilized underneath high or lower temperature, substantial humidity,dusty functioning atmosphere and many others.

Specifics Photos

Motor
1.IEC large effectiveness travel motor
two.IP54 and higher temperature F class rating
Controller
one.Easy to use and upkeep totally free
two.Consistent readout of pressure and temperature
3.Supplies 24 hrs automatic begin-quit procedure
Inlet valve
The exclusive style differential strain valve give speedy reaction underneath any
situation and maintains the set differential pressure among the inlet strain
and outlet force.100% modulating inlet valve to match system air desire.
Filtration system
Ultra effective Kerry inlet air filters give thoroughly clean air that traps dust particals to
much less than 3 microns.
Electrical management protection
one.Section protectiom
two.Period sequence security relay
three.Higher discharge temperature shutdown
four.Auto-twin handle
five.Overload begin protection

Business Profile
Luosi Technological innovation Co., Ltd.,a single of Biggest Air Compressor Manufacture with 33 a long time target
in air Compressor in China.We are specialised in R&D, production, product sales and support of air
compressors and supporting gear.With above 20,000 sq. meters morden workshop,a single
whole electronic inspection line, 3 air compressor line, all with innovative computerized production equipment.We have air compressor technology study and development, producing, high quality, logistics, procedure, advertising and marketing, and after-income service departments.

Our organization mainly creates screw air compressor, long lasting magnet variable frequency air compressor, two-stage long term magnet air compressor, specific laser slicing air compressor,
large and lower force air compressor, air put up-processing equipment (frozen dryer, adsorption
dryer, QPS precision equipment, filter, etc.), gasoline storage tank and supporting components.Our firm
provides range of products which can satisfy your multifarious needs. 

We adhere to the management concepts of “good quality first, consumer 1st and credit rating-primarily based” considering that
the establishment of the organization and constantly do our ideal to satisfy possible demands of our
consumers. Our organization is sincerely inclined to cooperate with enterprises from all in excess of the world
in get to realize a CZPT predicament considering that the trend of economic globalization has designed with anirresistible pressure.

Certification

FAQ
Q1:Are you a manufactures or trading organization?
A1:We are specialist manufacture of Screw air compressor of HangZhou
    (Shut to HangZhou) ,33 a long time of focus in Air Compressor.

Q2:What is actually your Shipping and delivery Time?
A2:Typically 10days.If it is an urgently or Non-standard buy, please contact us in advance.

Q3:How lengthy is your air compressor warranty?
A3:One 12 months for the total equipment and 2 several years for screw air conclude, except consumable
     spare areas.

Q4:How numerous Screw Air Compressor do you create each day?
A4:We can create 300 pieces everyday.

Q5:Can you use our brand?
A5:Sure, Each OEM & ODM provider can be approved.

Q6:How long could your air compressor be used?
A6:Generally, much more than ten a long time.

Q7:What is actually payment term?
A7:T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could acknowledge
      USD, RMB, Euro and other currency.

Q8:How about the maintenance?
A8:Very first maintenance need to have to be accomplished soon after 500Hours, and then each and every 2000-3000 hrs
      to do the typical upkeep, and take into account the actual atmosphere.

Q9:How do you manage top quality ? 
A9:1.The raw supplies are strictly inspected 
      2.Each compressor must go at least 5 several hours of steady screening before leaving
         the manufacturing unit.

Payment and Shipping and delivery

Product Parameters of Rodlars Power Frequency Screw Air Compressor 
Model Motor Power  Pressure  Capacity Noise  Level Outlet Pipe Diameter Net Weight Dimensions Lubricating oil capacity
KW HP Bar m3/min DB Inch Kgs L*W*H(mm) L
LS-10A 7.5 10 7 1.2 66±2 G ½ 160 900*640*850 10
8 1.1
10 0.95
12 0.8
LS-15A 11 15 7 1.65 68±2 G ¾ 270 1080*750*1020 18
8 1.5
10 1.3
12 1.1
LS-20A 15 20 7 2.5 68±2 G ¾ 290 1080*750*1020 18
8 2.3
10 2.1
12 1.9
LS-25A 18.5 25 7 3.2 68±2 G1 350 1300*850*1165 18
8 3
10 2.7
12 2.4
LS-30A 22 30 7 3.8 68±2 G1 410 1300*850*1165 18
8 3.6
10 3.2
12 2.7
LS-40A 30 40 7 5.3 68±2 G1 460 1300*850*1165 18
8 5
10 4.5
12 4
LS-50A 37 50 7 6.8 68±2 G1-½ 600 1400*1000*1345 30
8 6.2
10 5.6
12 5
LS-60A 45 60 7 7.4 72±2 G1-½ 636 1400*1000*1345 30
8 7
10 6.2
12 5.6
LS-75A 55 75 7 10 72±2 G2 1053 1700*1200*1630 65
8 9.6
10 8.5
12 7.6
LS-100A 75 100 7 13.4 72±2 G2 1040 1700*1200*1630 65
8 12.6
10 11.2
12 10
LS-120A 90 120 7 16.2 72±2 G2 1190 1700*1200*1630 72
8 15
10 13.8
12 12.3
LS-150A 110 150 7 21 72±2 G2-½ 1550 2300*1470*1840 90
8 19.8
10 17.4
12 14.8
LS-175A 132 175 7 24.5 75±2 G2-½ 1550 2300*1470*1840 90
8 23.2
10 20.5
12 17.4
LS-200A 160 200 7 28.7 75±2 G2-½ 2200 2300*1470*1840 110
8 27.6
10 24.6
12 21.5
LS-250A 185 250 7 32 75±2 DN100 3500 3600*2100*2190 110
8 30.4
10 27.4
12 24.8
LS-300A 220 300 7 36 82±2 DN100 2560 3600*2100*2190 125
8 34.3
10 30.2
12 27.7
LS-350A 250 350 7 42 82±2 DN100 4500 3600*2100*2190 150
8 40.5
10 38.2
12 34.5
LS-430A 315 430 7 51 82±2 DN100 6000 3600*2100*2190 150
8 50.2
10 44.5
12 39.5
LS-480A 355 480 7 64 84±2 DN100 6500 3600*2100*2190 150
8 61
10 56.5
12 49
LS-540A 400 540 7 71.2 84±2 DN100 7200 3600*2100*2190 180
8 68.1
10 62.8
12 52.2
Remarks:
1.The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
2.Recommend frequency 30-100%.
3.The above data is based on the standard grid-380V/50HZ.
Product Parameters of Rodlars Power Frequency Screw Air Compressor 
Model Motor Power  Pressure  Capacity Noise  Level Outlet Pipe Diameter Net Weight Dimensions Lubricating oil capacity
KW HP Bar m3/min DB Inch Kgs L*W*H(mm) L
LS-10A 7.5 10 7 1.2 66±2 G ½ 160 900*640*850 10
8 1.1
10 0.95
12 0.8
LS-15A 11 15 7 1.65 68±2 G ¾ 270 1080*750*1020 18
8 1.5
10 1.3
12 1.1
LS-20A 15 20 7 2.5 68±2 G ¾ 290 1080*750*1020 18
8 2.3
10 2.1
12 1.9
LS-25A 18.5 25 7 3.2 68±2 G1 350 1300*850*1165 18
8 3
10 2.7
12 2.4
LS-30A 22 30 7 3.8 68±2 G1 410 1300*850*1165 18
8 3.6
10 3.2
12 2.7
LS-40A 30 40 7 5.3 68±2 G1 460 1300*850*1165 18
8 5
10 4.5
12 4
LS-50A 37 50 7 6.8 68±2 G1-½ 600 1400*1000*1345 30
8 6.2
10 5.6
12 5
LS-60A 45 60 7 7.4 72±2 G1-½ 636 1400*1000*1345 30
8 7
10 6.2
12 5.6
LS-75A 55 75 7 10 72±2 G2 1053 1700*1200*1630 65
8 9.6
10 8.5
12 7.6
LS-100A 75 100 7 13.4 72±2 G2 1040 1700*1200*1630 65
8 12.6
10 11.2
12 10
LS-120A 90 120 7 16.2 72±2 G2 1190 1700*1200*1630 72
8 15
10 13.8
12 12.3
LS-150A 110 150 7 21 72±2 G2-½ 1550 2300*1470*1840 90
8 19.8
10 17.4
12 14.8
LS-175A 132 175 7 24.5 75±2 G2-½ 1550 2300*1470*1840 90
8 23.2
10 20.5
12 17.4
LS-200A 160 200 7 28.7 75±2 G2-½ 2200 2300*1470*1840 110
8 27.6
10 24.6
12 21.5
LS-250A 185 250 7 32 75±2 DN100 3500 3600*2100*2190 110
8 30.4
10 27.4
12 24.8
LS-300A 220 300 7 36 82±2 DN100 2560 3600*2100*2190 125
8 34.3
10 30.2
12 27.7
LS-350A 250 350 7 42 82±2 DN100 4500 3600*2100*2190 150
8 40.5
10 38.2
12 34.5
LS-430A 315 430 7 51 82±2 DN100 6000 3600*2100*2190 150
8 50.2
10 44.5
12 39.5
LS-480A 355 480 7 64 84±2 DN100 6500 3600*2100*2190 150
8 61
10 56.5
12 49
LS-540A 400 540 7 71.2 84±2 DN100 7200 3600*2100*2190 180
8 68.1
10 62.8
12 52.2
Remarks:
1.The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
2.Recommend frequency 30-100%.
3.The above data is based on the standard grid-380V/50HZ.

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.