China high quality Screw Frequency Conversion Air Compressor Machines Diesel Air Compressor small air compressor

Product Description

Introduction of Screw Frequency Conversion Air Compressor Machines Diesel Air Compressor

Feature 1: Environmental protection Accurate analysis of the internal airflow of the machine and proper use of the muffler board. The assembly of each component is controlled during the final assembly process to ensure low noise during operation. Even if the machine is placed near the work site or office, it will not cause uncomfortable reactions to the human body.Feature 2: Easy maintenance zmjt055Reasonable layout, humanized design, mature models. Whether it’s routine maintenance or troubleshooting, it’s easy to navigate.Feature three:When the rated pressure set by the machine is reached, the compressor is unloaded. When the system pressure is lower than the set value, the machine will immediately reload, and according to the actual gas consumption, intelligently select the appropriate automatic stop time after unloading to save energy, and ensure that when the system pressure is lower than the set value after shutdown The machine restarts immediately. Do not start up to more than hourly. The screw main unit sucks air in the low temperature zone to improve compression efficiency and reduce energy consumption.The product has been exported to the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran and other countries, and has won unanimous praise from customers.zmwm02

Parameter of Screw Frequency Conversion Air Compressor Machines Diesel Air Compressor


Model Exhaust
Frequency converter
Frequency converter
BK7.5-8G 0.8 1.2 7.5 72 200 800*620*800 200 800*620*800
BK7.5-8 0.8 1.2 720*700*1000 200
BK7.5-10 1 1 200
BK7.5-13 1.3 0.8 200
BK11-8G 0.8 1.7 11 72 300 1000*760*1090 300 1000*780*1090
BK11-8 0.8 1.7 290 700*670*1250 300 805*720*1250
BK11-10 1 1.5 300
BK11-13 1.3 1.2 300
BK15G 0.8 2.4 15 73 280 1000*670*1090 300 1000*780*1090
BK15-8 0.8 2.4 290 700*670*1250 300 805*720*1250
BK15-10 1 2.2 300
BK15-13 1.3 1.7 300
BK18-8 0.8 3 18.5 74 500 1080*880*1235 560 1080*970*1235
BK18-10 1 2.7 560
BK18-13 1.3 2.3 560
BK22-8G 0.8 3.6 22 74 380 1200*800*1100 390 1200*800*1100
BK22-8 0.8 3.6 540 1080*880*1235 600 1080*970*1235
BK22-10 1 3.2 600
BK22-13 1.3 2.7 600
BK30-8 0.8 5 30 75 650 1120*930*1290 740 1120*1571*1290
BK30-10 1 4.4 740
BK30-13 1.3 3.6 740
BK37-8G 0.8 6 37 76 570 1340*850*1310 820 1340*850*1310
BK37-8 0.8 6 730 1240*1030*1435 690 1240*1070*1435
BK37-10 1 5.5 690
BK37-13 1.3 4.6 690
BK45-8G 0.8 7.1 45 78 800 1480*1030*1345 1030 1480*1030*1345
BK45-8 0.8 7.1 820 1240*1030*1595 880 1240*1095*1595
BK45-10 1 6.5 880
BK45-13 1.3 5.6 880
BK55-8G 0.8 10 55 80 800 1480*1030*1345 810 1480*1030*1345
BK55-8 0.8 9.5 1200 1545*1200*1470 1270 1845*1200*1465
BK55-10 1 8.5 1270
BK55-13 1.3 7.4 1270
BK75-8 0.8 13 75 81 1470 1800*1190*1710 1470 1800*1190*1710
BK90-8 0.8 16 90 81 1520 1600
BK110&WH-8 0.8 21 110 82 2000 2100*1230*1730 2150 2600*1310*1800
BK110-8 0.8 21 2150
BK132&WH-8 0.8 24 132 82 2100 2270
BK132-8 0.8 24 2270

Pictures of Screw Frequency Conversion Air Compressor Machines Diesel Air Compressor


Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Structure Type: Closed Type
Installation Type: Movable Type


air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

As altitude increases, the air density decreases. This means there is less oxygen available per unit volume of air. Since air compressors rely on the intake of atmospheric air for compression, the reduced air density at higher altitudes can lead to a decrease in compressor performance.

2. Reduced Airflow:

The decrease in air density at higher altitudes results in reduced airflow. This can affect the cooling capacity of the compressor, as lower airflow hampers the dissipation of heat generated during compression. Inadequate cooling can lead to increased operating temperatures and potential overheating of the compressor.

3. Decreased Power Output:

Lower air density at higher altitudes also affects the power output of the compressor. The reduced oxygen content in the air can result in incomplete combustion, leading to decreased power generation. As a result, the compressor may deliver lower airflow and pressure than its rated capacity.

4. Extended Compression Cycle:

At higher altitudes, the air compressor needs to work harder to compress the thinner air. This can lead to an extended compression cycle, as the compressor may require more time to reach the desired pressure levels. The longer compression cycle can affect the overall efficiency and productivity of the compressor.

5. Pressure Adjustments:

When operating an air compressor at higher altitudes, it may be necessary to adjust the pressure settings. As the ambient air pressure decreases with altitude, the compressor’s pressure gauge may need to be recalibrated to maintain the desired pressure output. Failing to make these adjustments can result in underinflated tires, improper tool performance, or other issues.

6. Compressor Design:

Some air compressors are specifically designed to handle higher altitudes. These models may incorporate features such as larger intake filters, more robust cooling systems, and adjusted compression ratios to compensate for the reduced air density and maintain optimal performance.

7. Maintenance Considerations:

Operating an air compressor at higher altitudes may require additional maintenance and monitoring. It is important to regularly check and clean the intake filters to ensure proper airflow. Monitoring the compressor’s operating temperature and making any necessary adjustments or repairs is also crucial to prevent overheating and maintain efficient performance.

When using an air compressor at higher altitudes, it is advisable to consult the manufacturer’s guidelines and recommendations specific to altitude operations. Following these guidelines and considering the impact of altitude on air compressor performance will help ensure safe and efficient operation.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China high quality Screw Frequency Conversion Air Compressor Machines Diesel Air Compressor   small air compressor China high quality Screw Frequency Conversion Air Compressor Machines Diesel Air Compressor   small air compressor
editor by CX 2023-10-02